Class II Solar Power Surge Protection 1500V 40ka 3P Surge protector for Solar system
Class II Solar Power Surge Protection Feature:
• BRPV3 series photovoltaic special DC surge protection device (SPD) used in lightning protection of solar photovoltaic power generation system or other Dc power.
• BRPV3 series PV Surge Protective Device suitable for the new energy wind power generation system, its working voltage covers 500V, 600V, 800V, 1000V and 1500V.
• Green means normal, red to represent the fault, must be replaced and legible.
• It is installed in the main power system at DC circuit, to protect against the indirect lighting current, direct lighting current or other instantaneous over voltage.
• Optional remote communication interface, the realization of remote monitoring.
• Module design, convenient installation, with easy electric maintains operation
• High working voltage, high safety and stability.
Class II Solar Power Surge Protection Product Details:
| | BRPV3 1500 |
| SPD classification according to EN61643-31 | Type 2 |
| SPD classification according to IEC61643-31 | Class II |
| Max. continuous operating dc voltage Ucpv | 1500V |
| Nominal discharge current (8/20us) In | 20kA |
| Max. discharge current (8/20us) Imax | 40kA |
| Voltage protection level [(DC+/DC-)→PE] Up | ≤5.2kV |
| Response time tA | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ |
| Operating state / fault indication | green / red |
| Cross-section area (Min.) | 4mm2 |
| Cross-section area (Max.) | 35mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermoplastic UL94-V0 |
| Degree of protection | IP20 |
| Order Code | B8018 |
| Order code(With remote signal) | B8019 |
Dimension:
Class II Solar Power Surge Protection Introduction:
• The product can be pluggable modular design, standard guide installation.
• Built-in over current and over heat, temperature control open circuit technology.
• Selection of high-quality photovoltaic professional lightning protection devices, stable performance, flow in dual protection circuit.
• Easy installation with Din rail mounting.
• Visualization window, normal green, red fault.
• Type 2 DC surge protection devices BRPV3-1500 with 3 plug-in high capacity modules.
• Large flow capacity, low residual voltage, fast response (nanosecond).
• It is for DC string over voltage protection.
• With remote monitoring function, convenient remote monitoring (optional).
Class II Solar Power Surge Protection Installation:
• 1. Ground wire should be as short, straight and thick as possible to reduce the influence of distributed in distance on lightning discharge.
• 2. No need special maintenance, when surge protector happens fault, equipment connected to remote sign all will send alarm, then power off and change new SPD mold is fine.
Our Services:
• 17 years global leading profession manufacture of electrical products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
Why need pv surge arrester?
• To avoid the disconnecting problem at the end of life of the product on specific high voltage DC PV network and therefore offer a safe and efficient protection to photovoltaic installations, ask for a photovoltaic dedicated surge protective device.
• Reliable surge protection with future-proof performance is a must to maximise system uptime and profitability.
Company information:
Wenzhou Britec Electric Co.,Ltd. concentrates on the research, development and innovation of low voltage surge arrester. Main products and business: AC surge protection, DC power surge protector, data surge protective device, LED lightning arrestor, etc. Our company adheres to the concept of honesty, quality and progress. We are providing the dedicated service to customers according to our rich experience. Willing to go forward hand in hand with you!
Our certificate:
FAQ:
Q1. How can I place order?
A: You can contact us by email about your order details.
Q2. How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T is the most usual ways we are using.
Q3. What is the package of the cable?
A: Export standards packing, also can according to customer's requirment.
Q4. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the express cost.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
