Britec Electric Co., Ltd.
Britec Electric Co., Ltd.
Add to Cart
50kA three phase Type 1 Surge Protection Device TUV certificated BR-50GR 3+1
Ac Lighting Type 1 Surge Protection Device Features:
BRITEC type 1 and type 1+2 are designed to discharge high current surges without any destruction of the installation. This surge protective device is chararcterized by its capacity to withstand impulse current with 10/350 µs wave form which simulate direct impact coming from a natural lightning current. Type 1 and Type 1+2 SPDs are placed at the entrance point of the installation, in the main distribution board for a global protection of this installation.
Ac Lighting Type 1 Surge Protection Device Technology characteristic:
| Specification | BR-50GR 4P |
| Item name | Surge Arrester |
| SPD dassification according to EN61643-11 | Type 1 |
| SPD dassification according to IEC61643-11 | Class I |
| Max continuous 0perating a.c. voltage Uc | 275V |
| Lightning impulse current (10/350µs) limp | 50kA |
| Norminal discharge current (8/20µs) In | 50kA |
| Voltage protection level Up | 1.8kV |
| Follow current extinguishing capability a.c. lifi | 3kA rms |
| Max. backup fuse | 500A gG |
| Response time tA | ≤100ns |
| For mounting on | 35mm Din rail |
| Degree of protection | IP20 |
| Operating temperature range Tu | -40℃—80℃ |
| Cross-section area (Min.) | 4mm² |
| Cross-section area (Max.) | 35mm² |
| Enclosure material | Thermoplastic UL94-V0 |
Dimension:
Ac Lighting Type 1 Surge Protection Device Application:
Q1. Does your products listed for safety?
A: Yes, we have TUV, CE, CB these certifications.
Q2. What is the lead time for sample and mass order?
A: Samples is 10 days, and 20 days for mass order.
Q3. Do you accept the OEM / ODM order?
A: Yes.
Q4. Do you have MOQ for order?
A: General our MOQ is 20 piece, but we can accept 1 piece as sample order.
Q5. Can we visit your factory before we cooperate with you?
A: Of course. Welcome to your visiting to our factory.